What is the Energy Solutions TECH Incentives Program?

TECH Solutions Heater Rebate

There’s no question about the benefits of renewable energy. It provides cleaner air, protects wildlife habitats, and helps establish a healthy planet. The problem is that renewable energy adoption and use are pretty low. The more non-renewable energy sources are in use, the worse it is for the environment. For instance, the use of gas-based heating technologies in homes is constantly contributing to greenhouse gas (GHG) emissions.

As bad as this is, there isn’t a magical switch to stop it from happening. For one, low-emission and energy-efficient appliances like heat pumps are expensive. This limits the technologies to the few who can afford them. However, the following might solve the entire problem at scale. To strike a balance, governments have come up with an initiative dubbed the Energy Solutions TECH Incentives Program.

The Energy Solutions TECH Incentives Program

The Energy Solutions TECH Incentives program is designed to make it easier for customers to enjoy the benefits of new, energy-efficient technology by offering them rebates on qualifying heating and cooling equipment and water heaters. It is a win-win situation where homeowners receive efficient appliances and at the same play a part in reducing GHG emissions.

California is on a mission to achieve carbon neutrality by 2045, and switching to low-emission technologies will play a big part in getting there. The $120 million initiative was launched on December 7, 2021, and it is currently being rolled out in the state. It was developed as part of California Senate Bill 1477 and is funded by California gas corporation ratepayers under the auspices of the California Public Utilities Commission.

Who is Qualified for the TECH Incentives Program?

The state is aiming to have the majority switch to these low-emission space and water heating technologies. However, the amount of money set aside can only cater to a certain number of homes. Therefore, low-income earners are to receive the rebates. But then again, financial position is not the only requirement. Projects that fall within gas Investor-Owned Utility (IOU) service territory are also qualified.

Gas IOUs within California include:

  • Pacific Gas & Electric (PG&E)
  • Southern California Gas (SoCal Gas)
  • San Diego Gas & Electric (SDG&E)
  • Southwest Gas (SW Gas)

TECH Clean California incentive eligibility is determined solely by the project site’s zip code. There are specified areas like Long Beach, Catalina Island, and Palo Alto that are being left out of the program regardless of whether they are within eligible project territories.

Qualifying Products in the Program

Heat Pumps are the primary targets in this energy solutions program, and for good reason. GHG emissions in California are high since most homes use gas heat pumps. The newer heat pumps, which are electric and modernized, will help reduce GHG emissions in California. The following are the qualifying heat pumps in this case:

  • Unitary Heat Pump Water Heaters (Single-Family and Multifamily)
  • Unitary Package Pump (Single-Family and Multifamily)
  • Unitary Split Heat Pump (Single-Family and Multifamily)
  • Mini-Split and Multi-Split Heat Pump (Single-Family and Multifamily)
  • Central HPWH (Multifamily Only)
  • Package Terminal Heat Pump (Multifamily Only)
  • Single Package Vertical Heat Pump (Multifamily Only)

Why You Should Consider the Switch

The Energy Solutions TECH Incentives Program represents a promising step towards the adoption of clean energy in the U.S. By taking advantage of these perks, you can help reduce the carbon footprint, build consensus within the community, and lower your energy bills.

The Energy Solutions TECH program was started to help businesses, non-profit organizations, public and private entities, and institutions in California save money and energy by investing in qualified clean energy technologies.

As the program expands to include more homes and products in California, more incentives will be unlocked. Energy Solutions hopes to continue building on this program in the coming years—and it could revolutionize sustainability in California.

Ready To Get Started?

All qualifying and eligible homes can sign up for the program quickly with the help of certified participating contractors. Here at Anthem Air, we are glad to be taking part in the rollout of the rebate program. We fully endorse the program for the countless benefits it has for the community. If you are interested and not sure where to start, contact us for help, and we will walk with you every step of the way.

How Often You Need to Clean Your Ducts (& Why)

Anthem Heating and Air Duct Cleaning

Anthem Heating and Air Duct Cleaning

Is the Air in Your Home Healthy? What You Should Know

One of the main causes of indoor air quality issues is the presence of dust, allergens, or bad smells. The quality of air in our homes can be improved by reducing the amount of dust. 

The heating and air ducts in your home can be a breeding ground for mold and bacteria. So, make sure you hire a professional to clean them to ensure your home has a clean heating and air system. We will answer any questions you have about duct cleaning and make sure your system is free from mold or bacteria.

Some may think that there is not much they can do to improve their indoor air quality. But there are plenty of different things we can do, including using better cleaners, changing furnace filters more often, and cleaning the ducts.

What is Duct Cleaning?

Duct cleaning is the process of removing dust and other debris from heating and cooling systems. This is an important step in preventive home maintenance. Because facility ducts can go uncleaned for many years, dust builds up and needs to be cleaned as it can lead to poor indoor air quality, can cause allergies, and can even cause lung cancer.

How to Tell if You Need to Clean Your Ducts

Hire a professional to clean your ducts if you notice any, or all, of the following:

– You have strong allergies in your home.

– Your home smells bad.

– You can’t afford to buy an air filter for your whole house.

– You see dark stains on the ceiling or walls of the room where the return vent is located.

Can I Do It Myself, or Do I Need a Professional to Help?

Vent cleaning is not something you can do yourself. A professional needs to clean the venting system of your home for you.

The reason is because of the amount of time and the machinery involved. The average person does not have the time or the knowledge to do it properly, so it’s better to call in a professional who does this for a living.

How Do I Prepare My Home for Duct Cleaning?

A professional from the company will set up in one part of the house. He will remove the vent covers and contain all contaminated items within his machinery. Duct cleaning can be a little noisy during the process, but the machine usually runs only a couple of hours. The professional also makes sure no dust contaminants are released into your home during the process. 

Anthem Heating and Air Duct Cleaning

Hire a Professional Today for Clean Ducts and Clean Air in Your Home!

Anthem Heating and Air can answer all your questions regarding duct cleaning. They make sure your home has a clean heating and air duct system and cleaner air!

Complete Guide to Financing a New Heater

New Heater

How to Know When You Need a New Heater

Heating is one of the most important things in the winter. A new heating system saves you money on energy costs in the long run, so buying a new one is an investment for your future. Because of newer technology that reduces fumes and chemical emissions, a new heater also helps with the air quality in your home.

There are a few ways you can tell if you need a new heater.

If your home’s heating system is over ten years old, it might be time to replace it. Or, if the temperature of your home fluctuates too much or does not provide enough warmth during cold months, it’s time for a new furnace.

How Much Is Heater Installation?

A new heater costs between $1,000 and $5,000, with the average cost of a new heating system being about $2,500.

You may be wondering how much you’ll need to budget for the project. The first thing you should do is call a professional for an estimate. This helps you know what size and type of heater fits your budget.

In general, HVAC contractors charge between $100 and $300 plus the price of the equipment. This is for a typical installation project with no unusual challenges or problems that need special attention.

Can I Finance a New Heater?

The first thing you should do is figure out if you can finance a new heater.

For those who can, financing a new heater is the best option, as it spreads the cost over the lifetime of the product and avoids any upfront payments.

New Heater

What Are Your Finance Options?

There are several ways to finance a new furnace or heater. Some of the options include home equity, credit card, or personal loan. 

However, many homeowners face the challenge of credit scores and high-interest rates. Credit companies and banks won’t deal with anyone with low credit scores, and the process of building your score means more discomfort from the cold weather.

With the burdens of mortgage, credit card, and personal loan repayment, it isn’t easy qualifying for new furnace financing.

Notwithstanding your current financial commitment, there are options to finance a new heater with PROPERTY ASSISTED CLEAN ENERGY programs.

When you work with a professional HVAC company, helping you achieve HVAC running efficiency is their priority. For this reason, Anthem Heating & Air provides its customers with access to friendly, home improvement finance options.

YGRENE Program

  • Low-cost funding over long terms
  • Energy efficiency and renewable energy 
  • Water conservation upgrades

 HERO Program

  • Low-cost, long term funding
  • Upgrades funds for energy and water efficiency
  • Central air-conditioning projects
  • Home improvement – landscaping, roofs, doors, and windows

SYNCHRONY Private Finance

  • Unsecured, revolving credit lines
  • Simple application and fast credit decisions process 
  • Financing for individual circumstances
  • No interest option
  • 115-month payment option
  • Flexible payment and repayment plan

REBATES AND TAX CREDITS

  • Rebates from various sources, including federal tax credits
  • Upgrading to energy-efficient systems
  • Compensations for home improvement

ENERGY BUNDLE PACKAGE

You can sort your new heater financing under this program. The package takes the best of each financing option above to give you appropriate and pocket-friendly financing. Call (760) 895-2621 now for details!

Need a Reputable HVAC Company Near You?

When you need to talk with experts about financing your home heating needs, you can count on Anthem Heating and Air to guide you through the process. Call (760) 895-2621 now to discuss your new heater financing.

We also handle AC financing and installation.

YouTube video

Why is My Heater Making Noises?

noises

Anthem Heating and Air

Your heater is like a friend who comforts you when the weather is screaming minus degrees. It’s the best feeling ever, right? Now imagine that same friend, but this time they’re yelling at you and making all sorts of weird noises. That can be pretty annoying, especially when you can’t figure out what’s wrong with them. This is what a noisy heater is like.

These problems are common with many home appliances, heaters included. There are many reasons why heaters make unusual noises. And, sadly, most of them are indicators of faults and maintenance problems. This article reveals the causes of these noises and what you can do to avoid them.

Why Your Heater Makes Strange Noises

Most heaters function similarly. For them to warm your home, many components must work together, including blower fans, draft inducers, air filters, and motors, most of which have moving parts. Without proper maintenance, parts are bound to fail, and noises are a major sign of failure or inefficiency. Take, for instance, when a screw or a bolt becomes loose, what happens? The shaking leads to rambling or rattling noises. This is one of the noises common with heaters.

YouTube video

Common Strange Heater Noises 

  • Rattling noises

Loose nuts, bolts, and screws cause the heater to shake, especially the blower fan, producing rattling noises. Particularly, the blower fan has a set screw holding the blower wheel in place. When this screw loosens from the constant spinning, it tends to rock and produce a strange rattling noise. More so, when the mounting bolts holding the blower fan in place loosen, the heater will make noises when it’s running. These noises can be fixed by simply tightening the screws and bolts. 

  • Grinding noises

This heater noise is produced when parts of the heater scrape against each other, sounding like metal screeching sounds. Although they are not as intense as the metal screech noise, they are quite loud and distinct. A good example is when a part gets stuck in a moving part. Over long periods, this abrasion wears off the involved components and can cause total failure. Call a heating expert for help in such situations.

  • Truck-idling noise

Have you ever heard the noise trucks make when the engine is on, but the truck is not in motion? That is called an idling noise. Since your heater is not a truck, you don’t want this noise coming from it. The noise indicates worn-off bearings, especially in the blower motor and draft inducer fan. This oddly satisfying noise can be eliminated by fine-tuning the affected part of the heater and helping prevent more damage.

  • Whistling noise 

Is your heater making whistling noises? That could be a dirty air filter. When air tries to force itself through a dirty air filter, it will whistle. The air filters are there to catch dust that goes through the return duct. This dirt can harm the heat exchanger if allowed to pass through. Again, you don’t want dirty air circulating inside your home’s interior. A quick solution is ensuring air filters are replaced frequently.

  • Squealing noises

Heaters with belt-drive motors have a rubber conveyor-like belt that assists the rotation of the motor. Several things can go wrong with this belt. It can snap out of alignment, wear off, or get dirty. All of these situations make the heater produce squealing noises. These noises can be eliminated by cleaning, replacing, or realigning the belt properly.

noises

How To Stop the Heater Noises Completely

Most of these heater noises are common. However, they need to be fixed as soon as they are experienced. How else can you enjoy a peaceful, cold evening? Again, you might realize that most of the noises are preventable in the first place. Yes, it is possible with scheduled maintenance. 

Technicians offer HVAC maintenance to ensure that all your appliances operate optimally at all times. If you haven’t before, now is the best time to sign up for a maintenance schedule with a professional HVAC company. 

How Anthem Can Help

Anthem offers an HVAC maintenance package at an incredible value. Our Preferred Maintenance is a one-year commitment and includes benefits that extend the life of your equipment, keep it running efficiently, and give you peace of mind. Anthem is one of the leading air conditioning repair companies in Coachella Valley. We have the experience and expertise to help you stay warm during this cold season. We service the Coachella Valley and Riverside seven days a week, and our technicians are ready to go any time of the day.

How Much Does It Cost to Replace Ductwork?

duct

 

Sadly, there is no straight answer to this question without looking at the various factors surrounding the specific duct. However, a replacement cost is often around $35-$55 per linear foot or $175 – $400 per duct. Ideally, it will cost around $1,000 to $5,000 for a single-family home.

Why is Ductwork so Important?

Good ventilation, optimum air distribution, and ideal temperature are vital to every home and office. These qualities require an optimally working duct to achieve.

Without functional ductwork, there is no guaranteeing your HVAC will deliver excellent indoor air quality. Also, a damaged duct coupled with poor airflow could cause moisture in the attic, resulting in health issues.

In a nutshell, if you desire quality airflow from your heating and cooling system, your ductwork should be in good shape.

When Should Ductwork be Replaced?

Nothing lasts forever, including your ductwork. With a faulty duct, the HVAC performance will always be below expectations.

Experts recommend replacing your ductwork between ten and 15 years. Various factors, such as pests or mold, could cause your ductwork to depreciate faster. Additionally, poor duct materials or handling could lead to early degeneration of your ductwork.

Ideally, your ductwork is due for a replacement if you notice any of the following:

  • Noisy HVAC operation
  • Increase in heating or cooling bills
  • Uneven airflow in the conditioned environment
  • Moisture in attic
  • Leaking duct
  • Moisture spots on the ceiling
  • Having a dusty environment
  • The stench of mildew or mold inside your home
  • Experiencing pests inside your home
  • Members of your family experiencing respiratory problems
  • Need for a bigger or smaller ductwork
  • Your ductwork is over 15 years old 

What Influences Ductwork Replacement Costs?

Ductwork replacement cost depends on length, type, labor, location, and materials.

  • Size: House sizes vary from project to project. Large homes need longer ductwork than small ones.
  • Type of ductwork: There are different types of ductwork and costs. You can choose between flexible or metal ducts. Also, the different areas of the project site may require the application of different ducting materials. Therefore, the type of duct chosen is a strong cost determinant.
  • Location: The site of the project influences the cost to a large extent. Where the passage of the ductwork is hard to reach, the cost will be different from an easy to access area.
  • Use of return ducts: Where your project requires a return duct to optimize airflow and circulation, the number of ducts for the project increases along with the cost.
  • Mold remediation: Where your technician discovers mold within your wall space, the required treatment adds to the cost.
  • Ducting complexity: Having to go around obstacles in the way of ducting will push up the cost.
  • Season: A project at a busy time of the year influences the cost of replacement.
  • Where you live: Cost of living impacts the cost of ductwork. Those in rural areas generally pay lower costs compared to the households in urban and metro areas.

duct

Average Ductwork Replacement Costs

On average, a typical ductwork replacement costs anywhere from $175 to $400 per duct. The cost covers old duct removal, supply register, installation of new or old ducting material, and disposal of used materials.

For the experienced DIY homeowner, the typical average cost per linear foot of ductwork is around $35-$55. However, due to the technicality of ductwork, it’s recommended to call an HVAC professional for an actual estimate.

Why You Need Experienced HVAC technicians for Your Ductwork

Considering the investment of ductwork and the benefits of quality installation, having a professional on the job is cost-effective. Proper ducting helps with energy efficiency and quality airflow. Also, you will give your ductwork up to 15 years of longevity.

Spending a little extra for quality service delivery prevents costly maintenance and low HVAC efficiency.

Since poor airflow can be annoying and energy-sapping, you pay for peace of mind by engaging a competent HVAC professional.

If you are a homeowner in the Coachella Valley and Riverside, California, areas and are considering ductwork replacement, Anthem Heating and Air Conditioning is a reliable choice.

Call (760) 895-2621  now to discuss your specific needs and get our competitive quote.

Why Is My Heater Making an Unusual Smell?

furnace smell

furnace smell

That unusual smell that runs all over the house when the heater is on can be pretty intimidating. Your worries are justified despite this being a common thing that most homes with central heating systems experience. Basically, if you live in a house full of occupants and pets but neglect the HVAC systems, these issues are relatively common. Although, as you will realize, problems like unusual smells are in your control. You’ll see what this means in a moment. But first, let’s start with what causes these dreadful smells in your home.

Most Common Unusual Smells From The Heater

You don’t have to be a “super smeller” to recognize and categorize the unfamiliar smells that are common with heaters. Although some smells are quite normal and safe, some aren’t and require specialized help to eliminate. Ideally, the foul odors you experience result from burning material or leakages. 

Therefore, based on what causes the stench, you should be able to slightly detect smells, such as burned material, rotten eggs, or a musty smell. Don’t worry if none of these relate to the smell you experienced. This is because the actual smell might vary, but the causes remain the same. So, what exactly causes the unusual smells?

1. Burning Material Smell

This is the most common smell you will come across. It could mean that something is overheating in the furnace, or there’s burning foreign material. Depending on which it is, you might experience odors such as melting rubber, smoke, or burning plastic.

If the odor is more of the furnace heating foreign material, that’s a normal occurrence. Dust and debris that are stuck on the heater burn off when it’s turned on. However, when you notice scents such as burning plastic or rubber, that could mean a technical hitch in the heater. 

The smell is bound to disappear eventually with burning dust, but for burning plastic smells, you might need to contact an HVAC professional. Technical hitches could easily escalate into bigger problems, like fire.

2. Rotten Egg Smell

Most gasses are odorless, so to help detect leaks, special chemicals are added to give them distinct smells. To most people, this chemical smells like rotten eggs. If you detect a rotten smell coming from the heater, the probability is high that there is a gas leak from the gas furnace. 

Gas leakage is the last thing you want to be experiencing in your home. Leaks are dangerous if uncontained. Slight friction can cause a massive explosion in the case of a gas leak. You don’t want that to happen. 

The best course of action is to ensure proper ventilation first and get everyone out of the house. Then, contact the gas company or HVAC company that you trust to handle the case promptly. 

Other Unusual Smells From the Heater

Some of these scents depend heavily on the type of heater you are using. For instance, if you rely on heat pumps to warm your house, you might experience musty smells coming from the air vents. This smell is usually caused when mold and bacteria in the vents are heated off. This smell can affect your respiratory system if inhaled over a long period. Avoid this from happening by having the air vents cleaned regularly. 

General Guidelines for Avoiding These Smells

Simple maintenance practices such as checkups and cleanups reduce the chances of gas leaks, technical hitches, and dust build-up that cause putrid odors in your home. Situations, like travel, increase the possibilities of dust build-up, thus leading to burning odors. Also, these smells are common during the beginning of the cold season, especially if the heater has not been in use. 

In both cases, you need to call an HVAC technician to inspect the heater and ensure it’s good to go. Changing the air filters in the vents is also effective at reducing musty odors. 

A thorough cleaning of the vents will eliminate bacteria and other deposits causing foul odor during heating. Once you have explained to the HVAC company the type of smell you experienced, they will be able to pinpoint the issue and come up with a solution.

furnace smells

Prevent Unusual Heater Smells with Maintenance 

Properly maintaining and servicing your heater helps extend its life and keep it running efficiently. That’s where we come in. Anthem offers our Preferred Maintenance package at an incredible value. Each maintenance package is a one-year commitment and includes benefits that extend the life of your equipment, keep it running efficiently, and give you peace of mind. Call us today on 760-892-2621 for a free estimate.

Why Is My Heater Blowing Cold Air?

While the Coachella Valley and Riverside, California areas’ weather can go up to 107°F, the cold weather is often discomforting. At night when the temperature drops, most homes depend on their HVAC to provide warmth, and it’s disturbing to have your heater blowing cold air!

For almost four months of the year, starting in late November to mid-March, the Coachella Valley area’s temperatures can be as low as 43°F.

During such wintry times, HVACs are lifesavers! They provide needed comfort in the hottest and coldest of seasons. However, you should be concerned when your heater is blowing cold air, instead of warm, in winter.

At Anthem, a professional heating and air conditioning company, our priority is your comfort. This article will guide you through what to do if your furnace is blowing cold air when you need warmth.

YouTube video

Why cold instead of warm air?

If only there was a straight answer to this simple question. However, when dealing with HVAC, there are several possible causes. The answer could run from a simple energy connectivity issue to more complex, technical problems.

Let’s start with the easy causes. These could be anywhere from utility to thermostat setting issues.

Utility Crises

The first place to look when your heater is blowing cold air is your electrical connection.

Make sure you are current on your utility bill payments. You can call your energy company for confirmation if in doubt.

If you are in good standing with your payment, you can request your energy company to confirm everything is okay. Sometimes, you are experiencing cold air because there is no connection. However, if otherwise, pay up and get connected; case closed!

Thermostat Settings

Living in a climate with the high end of hot weather, Coachella Valley and Riverside, California, homes often need air conditioning to keep going. Perhaps, your thermostat setting is on air-conditioning and not on heat. Try checking your thermostat setting and confirm the actual position.

Another related thermostat issue is you could have turned on the cold air by mistake. Given the sophistication of HVAC, it is possible to change settings unknowingly. You need to take a second look at your thermostat to confirm it’s not the cause of the cold air.

Fan Problems

A fan issue is sometimes thermostat-related. From experience, some users accidentally switch off the fan and get worried their heater is blowing cold air.

Also, you may have turned off the fan during summer since you don’t need it as such and forget to turn it back on in winter. 

Whatever the case, a careful check of your thermostat could help you discover the error and make it right. One way to avoid this error is to use the auto setting, and the system will auto-switch as needed.

Clogged Filter

A minor problem resulting in a bigger one is a case of a clogged filter. If your filter is obstructed, it can block air passage, whether cold or hot. A way to know if your filter is responsible for cold air is to swap the filter to see any difference.

Tripped Breaker

Another problem that is likely is the circuit breaker. A tripped breaker would shut off the electricity supply and stop the heater from starting. Sometimes, your heater may not run, and in some cases, the system would work partially.

Now, let’s consider the technical causes.

While you could DIY the easy causes, you need a competent HVAC professional to troubleshoot the technical ones. The reason to have a technician check your HVAC is to prevent more damages from happening.

Once the easy causes are isolated, let your HVAC technician investigate other possible causes. Some of the technical reasons your heater is blowing cold air are as follows:

Pilot Light Out

For older furnaces, the pilot light in the off state could cause your heater to blow cold air. Without the pilot light turned on, the heat won’t come through. Though your safety manual gives details on accessing the pilot light, you should allow a competent HVAC technician to handle it. 

However, the pilot light may not be the problem if your HVAC is less than a decade old.

Dirty Sensor

The flame sensor tells your furnace to turn on or off. It detects hot air and keeps it coming if you have set your thermostat to hot air. However, a dirty sensor could malfunction and cause your HVAC to blow cold air instead.

Again, you should call your HVAC technician to troubleshoot a possible dirty sensor and fix it.

Clogged Condensate Line

The high-efficiency heater comes with condensate lines responsible for keeping water away from your furnace. Your furnace might not ignite if the condensate lines are clogged. Once ignition fails, there won’t be hot air through the vents.

In the case of clogged condensate lines, you need your HVAC technician to detect and fix them.

Gas Supply Issue

In the case of gas supply, you need your HVAC technician to troubleshoot and resolve it. One way to detect gas supply issues is with the pilot light. If the light goes out instantly or does not come on at all, it could be a gas-related problem.

If gas supply is the reason for blowing cold air, your HVAC technician can detect and resolve it appropriately.

Leaky Air Ducts 

All incoming hot air escapes before getting to the vent if you have leaky air ducts. Age and rodent bites could cause your air ducts to leak. A thorough inspection of the lines would reveal likely leakages. 

If leaking air ducts are the case, your technician will seal the area and restore hot air. 

Are you having issues with your heater in wintry weather?

If you live in the Coachella Valley and Riverside, California, areas and have issues with your heater blowing cold air, call Anthem Heating and Air Conditioning immediately. 

Why Anthem?

Your comfort is the reason you installed an HVAC. Anthem is in business to help you achieve your goal and keep you happy always.

Call (760) 895-2621 now and let reliable Heating and Air Conditioning professionals make your HVAC work again.

Why Is My AC Leaking Water?

One common issue homeowners in the hot desert of Southern California face is their air conditioners leaking water. In this post, we’ll dive into the various reasons why your AC unit may be dripping water and what steps you can take to fix the problem.

Table of Contents

Causes of AC Leaking Water

Preventative Measures for AC Leaks

Repairing an AC Leak

Conclusion

YouTube video

Causes of AC Leaking Water

A refrigerant leak is a widespread source of condensation on the evaporator coils. If this condensation isn’t drained properly, it will eventually overflow and cause your air conditioner to leak water.

Another common culprit is a dirty air filter. When your AC unit’s air filter gets clogged with dust and debris, it restricts airflow and causes the evaporator coils to freeze up. As the ice melts, it forms a puddle of water that leaks out from underneath your AC unit.

A damaged drain pan or clogged drain line are also possible sources of an AC leak. The drain pan is designed to collect any excess moisture from the evaporator coil so that it can be safely drained away from your home via a dedicated drainage line connected to your HVAC system. If either component becomes cracked or blocked by dirt or debris, then you could end up with an overflowing drain pan and an unexpected puddle.

If the compressor of your air conditioning unit has ice forming on it. Low refrigerant levels prevent heat transfer inside the unit, leading to excessive frost buildup on both indoor and outdoor components, resulting in melted ice dripping onto whatever surface lies below them, including carpets. To fix this issue, it is best to contact an HVAC professional who can inspect and repair any potential issues with low refrigerant levels before they become more serious problems later on.

Key Takeaway: A refrigerant leak, a clogged air filter, or an issue with the drain pan can all be the causes of water leaking from your AC unit. Low refrigerant levels may also result in ice forming on the compressor and dripping onto surfaces beneath it. An HVAC professional should be contacted to inspect and repair any potential issues before they become more serious problems later on.

Preventative Measures for AC Leaks

1. Change Your Air Filters Regularly. Changing your air filters is one of the most important steps you can take to prevent AC leaks. Dirty air filters can cause your AC unit to work harder than it needs to, leading to excess strain on the system and potential leaks. Fortunately, air filters are inexpensive and easy to replace, making this an affordable and straightforward maintenance task.

2. Clean the Condensate Drain Line. Over time, the condensate drain line in your AC unit can become clogged with dirt, debris, and other materials. This can cause water to back up and potentially leak from the unit.

3. Ensure Your Drain Pan Fits Your Unit. The drain pan is an important component of your AC unit that collects water and sends it down the drain line. However, not all drain pans are created equal, and using the wrong size or type of drain pan can cause problems. To ensure optimal performance and prevent leaks, ensure your drain pan fits your AC unit.

4. Use Bleach to Keep Your Drain Line Clean. Microbes like algae and mold can grow inside your AC unit’s drain line over time, leading to clogs and leaks. To prevent this, pouring bleach into your drain line every six months or so is a good idea. This kills any microbes and helps keep the drain line clean and clear.

5. Avoid Overworking Your AC Unit in Hot Weather. When the weather gets hot, it’s tempting to crank up the AC as high as it will go. However, this can strain your AC unit excessively and potentially lead to leaks. To avoid this, set your AC to a reasonable temperature and avoid overworking the system. This will help prevent leaks, save energy, and reduce your environmental impact. Also, make sure you have the right size HVAC system for your home.

Conclusion

It is important to remember that an AC leaking water can signify something more serious. Examining and rectifying any issues with your AC system promptly can help avert costly fixes. If you have observed signs of an AC leak, it is advisable to immediately contact a professional HVAC technician to diagnose and rectify the problem before it worsens. Don’t let your AC leaking water become a bigger problem – take care of it now. Try following this checklist of HVAC maintenance before issues arise.

If you’re experiencing water leakage from your AC unit, don’t wait to get it fixed. Our Anthem HVAC repair experts can provide the best solutions for your needs quickly and efficiently. Join our HVAC Maintenance Membership program for a more comfortable home in Coachella Valley, CA. Contact us today to learn more about our Comfort Club Membership and start enjoying the benefits!

 

The Complete Guide on Home Air Conditioning Systems

Complete Guide on Home Air Conditioning Systems

Why You Have Uneven Cooling In Your Home

What is an HVAC System?

An HVAC system is a mechanical system that provides fresh air ventilation, removes the heat, and transfers heat. It mainly includes an air-handling unit, ducts to distribute the conditioned air to various rooms or zones within the building, filters to remove particles from the conditioned air before it enters its destination room/zone, heating, and cooling coils for controlling the temperature in each room or zone of the building.

Homes and HVAC Systems That React Differently to Different Temperatures.

When considering the purchase of a home, one must also think about the HVAC system. Air conditioning is crucial in the summer months, and heating is necessary during winter.

There are three different types of homes that react differently to different temperatures: single-zone homes, dual-zone homes, and zoned homes.

Single zone homes don’t have central air conditioning or heating systems; they only provide local cooling and heating for specific rooms. Dual-zone homes offer more comfort than single-zone homes because their HVAC systems provide both cooling and heating. Zoned houses let homeowners control individual zones (rooms) with different temperatures to make them comfortable for various activities like sleeping or cooking dinner.

Common Problems with AC in the Heat of Summer

Because of the hot summer temperatures, people often neglect their AC units and do not get them serviced when they should. This leads to many problems with the AC. From making the home too cold at times to overworking and blowing out circuits to not working at all – there are several problems that can arise.

Air Conditioning System Neglect

There can be a lot of neglect happening in the air conditioning system that leads to a lot of problems. Simple negligence or lack of knowledge can cause the deterioration of the air conditioning system. There are several things that could be done to help prevent this from happening.

Some things that should be checked on a regular basis are:

– Filters should be checked at least every month and once a year if they haven’t been changed.

– The fan should run for 15 minutes after the compressor has been turned off to make sure it’s in good condition and will start up again in the future when needed.

– When turning off your air conditioner in winter, make sure to turn it back on again when spring arrives.

Leaking or Damaged Ductwork Causes Uneven Cooling

Leaking or damaged ductwork can cause uneven cooling and other problems.

Leaking or damaged ductwork should be repaired as soon as possible. This will prevent the unit from having to work harder to cool the house, which can lead to high energy bills and a shorter life for your cooling system.

How to Determine if You Have Leaking Ductwork

If the ductwork is damaged or leaking, there are a few signs. One, as we have discussed throughout this article, is uneven cooling. This may be noticeable by rooms being warmer than others, yet their exposure to the sun is similar.

You may notice the volume of air coming from the vents, with them open, is lower or, in some cases, non-existent. If it is non-existent, a damaged or restricted duct run may be the problem.

Often when a duct is leaking air, it may create moisture in the attic. This moisture will make the insulation, particularly in older homes, have a wet, musty smell.

In extreme situations, you may also notice evidence of moisture on your ceiling. In any case, with a leaking or damaged duct run, you may need to contact an HVAC expert.

How Much Will It Cost to Replace Damaged Ductwork in My Home?

When it comes to home renovations, ducts are often overlooked. Located in the ceiling or crawlspace, these ducts are responsible for pulling air from the furnace or air conditioner to make sure you have a comfortable living space. Ductwork is made of metal, which can easily get damaged due to wear and tear.

The cost of replacing ductwork varies depending on the size and complexity of your home. For example, an average cost is $1,500-$2,000 per unit. This does not include insulation work such as sealing all the cracks and holes in your home with spray foam insulation or caulk which can add up to another $1-$2 per square foot of surface area.

How to Fix Uneven Cooling in Your Home and Enjoy the Season’s Warmth

Even cooling and heating performs best when several simple maintenance actions throughout the year are done:

Change Filters This is one of the easiest yet most often neglected. We suggest changing once every other month. This, of course, depends on your area and lifestyle. Dry, dusty areas or homes with pets should consider once a month.

Keep AirFlow Free from Restrictions Open vents and keep return air vents clear. Careful not to hide the return vent behind a couch. This will restrict airflow and reduce cooling and heating efficiency.

If you can, look in your attic or crawlspace and listen for the sound of air escaping. This could be a damaged duct. And while you’re there, take a whiff, and if it smells a bit musty, it could be a damaged duct.

If you have done these things and are still unable to get a good steady airflow that cools your home evenly, call Anthem Heating and Air today. We service the entire Coachella Valley and Riverside, California.

If you live around the Coachella Valley area – Indio, Indian Wells, Palm Desert, or La Quinta – a reputable heating and air conditioning repair and provider company is nearby. Let Anthem Heating & Air help you with all your air conditioning and heating questions and needs! Visit us at www.anthemcv.com/ or call now at (760) 895-2621.

The SEER Ratings Guide for Homeowners

https://anthemcv.com

https://anthemcv.com

Introduction: What are SEER Ratings?

A SEER rating measures the cooling efficiency of a central air conditioning unit or the heating efficiency of a heat pump.

The SEER (Seasonal Energy Efficiency Ratio) rating is a measure of cooling efficiency for central air conditioners. It is based on the temperature difference between indoor and outdoor air, with higher SEER ratings indicating greater energy savings. The best SEER ratings are 14 or higher.

A SEER rating of 14 or higher is considered to be very efficient, while a rating of 10 or lower does not meet the minimum efficiency threshold.

The higher the temperature differential, the higher the SEER rating.

A SEER rating is a measure of the energy efficiency of air conditioning.

What is the Difference Between SEER Ratings?

Though SEER ratings are a great way to measure the efficiency and effectiveness of a heat pump, they are not always reliable. The SEER rating system was developed in the 1970s, and there have been changes in technology since then. There is no perfect formula for calculating efficiency or determining an accurate SEER rating.

What is the Difference Between SEER Efficiency Ratings?

It would be difficult for someone to make an educated decision about which SEER efficiency rating they want without understanding the difference between the ratings.

A SEER, or Seasonal Energy Efficiency Ratio, is a measurement of heat pump efficiency and is an important factor in determining the energy savings and operating cost of a heat pump. The higher the SEER rating, the more efficient and economical that heat pump will be.

A heat pump can be defined as a device that moves heat from one place to another. They are generally used in the wintertime to release heat from inside of buildings and transfer it outside. The higher the SEER or Seasonal Energy Efficiency Ratio, the more efficient and economical that heat pump will be.

 

How to Evaluate the Best High-Efficiency Seer Heat Pumps

This article will guide you on how to Evaluate the Best High-Efficiency Seer Heat Pumps.

A heat pump is a device that transfers heat from one place to another. When it is functioning, it uses temperature differences to move heat from the warmer place to the colder place.

There are three main things that you need to look at for when evaluating these heat pumps.

These are efficiency, noise level, and installation cost.

https://anthemcv.com

What Is a High Efficiency Air Conditioner?

Choosing an air conditioner can be difficult, but there are some features to keep in mind when researching your purchase. Air conditioners are constantly evolving, but there are still many factors to consider.

Efficiency, noise level, and installation cost are all factors that should be considered when deciding which air conditioner is right for you.

A high efficiency air conditioner is a type of air conditioning unit that can provide greater cooling power than the traditional air conditioner.

There are many advantages to installing an energy efficient AC unit. One of the most important advantages is that they can reduce your utility expenses. This is because they use less energy to generate the desired level of cooling. This means that by using one you could potentially save money on your electric bill, or at least reduce it significantly.

Tips on Choosing a SEER Rating of 14 or Higher

Choosing SEER ratings of 14 or higher is the best way to ensure that your new home will be energy efficient. There are three ways to get a SEER rating:

1) Ask your contractor an HVAC installer for the SEER rating.

2) Purchase a home with a pre-tested and sealed SEER rating label on it.

3) Buy a new home with an Energy Star label on it.

If you live around the Coachella Valley area – Indio, Indian Wells, Palm Desert, or La Quinta – a reputable heating and air conditioning repair and provider company is nearby. Let Anthem Heating & Air help you with all your air conditioning and heating questions and needs! Visit us at www.anthemcv.com/ or call now at (760) 895-2621.

YouTube video